|
|
|
Horizontal Centrifugal Pumps
Reference: 3627/2010 10/26/2010, Location: Middle East
Category: Horizontal Centrifugal End Suction Pumps
Scope of Work
Supply of # 2 complete horizontal centrifugal pump w/ turbine and base plate
Item: P 403 / P.F. 1 No. of stages: six
Liquid handled: HC liquid (heavy naphtha)
Specification: normal design
Capacity in GPM @ P.T.: 166 179
Suc. Press. P.S.I.G: 0 33
Disch. Press. P.S.I.G: 850 850
Diff. Press. P.S.I: 850 817
Vapor Press @ P.T: NIL 15
Design Head (ft): 2700 2780
N.P.S.H. (avai.) (Ft): FLOODED
N.P.S.H. (reqd.) (Ft): 8
Pumping Temp. (°F): 100 217
Specific Gravity @ P.T.: 0.728 0.679
Viscosity @P.T. (SSU) CPS: 0.57 0.30
Nozzles / Suction: 4" 600 # ASA R.F. (Top)
/ Discharge: 2" 600 # ASA R.F. (Top)
Thrust Bearing: Kingsbury
Radial Bearing: sleeve
Bearing Lubrication: Forced FEED
Pump should be according to API 610 Last Edition, between bearing mounted (API BB5)
Pump should be equipped with:
Mechanical seal exclusively from (John Crane or Burgmann)
Flexible coupling, with spacer.
Non-sparking coupling guard.
Turbine specifications:
Inlet Steam Temp. °F: 480
Inlet Steam Press. PSIG: 210
Inlet Steam Press. (Max) PSIG: 250
Exhaust Steam Press. PSIG: 40
Rated Power HP: 140
Speed RPM: 4000
Turbine shall be:
Manufactured According To API (611), Last edition.
In-between bearing design, horizontally split casing with centerline support (upper half can be removed without disconnecting inlet & exhaust piping).
Back pressure design.
Equipped with sleeve type radial bearing, ring lubricated, water cooled with water specification (3.5 bar 32 °c) and antifriction thrust ball bearing.
Equipped with floating carbon seal rings on both sides.
Turbine shall be furnished with:
TG 13 Governor.
Mechanical tachometer.
Thermometer for both bearing housings.
Strainer at turbine inlet.
Adequate cooler, if necessary.
- Pumps are accepted, exclusively, from the following origins: (USA West European Japan).
- Turbine manufacturer should be one of the following: (Elliott / Peter-Brotherhood).
|
Related Prooducts: Horizontal Centrifugal End Suction Pumps
Axial Flow Pump
Deep Well Pumps
Fire Certified Pump, Portable & Wheeled
Fire Certified Pump, Skid mounted
General
High Pressure Pumps
Horizontal Centrifugal End Suction Pumps
Horizontal Split Case Pumps
Hydraulic Pumps
In-Line Pumps
Magnetic Coupled
Mixed Flow Pump
Mud Pumps
Multistage Horizontal Centrifugal
Plastic Pumps
Self Priming Pumps
Slurry Pumps
Submersible Pumps
Vacuum Pumps
Vertical Centrifugal Pump
Vertical Pumps w/ Cardan Shaft
Vertical Split Case Pumps
Vertical Submerged Pumps
Related Tenders:
Fire Certified Pump, Portable & Wheeled
Fire Certified Pump, Skid mounted
General
High Pressure Pumps
Horizontal Centrifugal End Suction Pumps
Horizontal Split Case Pumps
Hydraulic Pumps
Mud Pumps
Self Priming Pumps
Submersible Pumps
Vacuum Pumps
Vertical Centrifugal Pump
Vertical Submerged Pumps
|
|
|
|
