|
|
|
Testing and Sampling Equipment
Reference: 58.11.4102 6/10/2011, Location: Middle East
Category: Laboratory, Testing Equipment
Scope of Work
1- Supply of #20 bottom hole flow through oil sampler with specification as follows:
- Capacity 600cc
- Maximum Temperature150 °C
- Maximum Pressure 10,000 psi
- Diameter 1.5”
- Seal Material Viton
- Material 17-4 PH/SS Monel , H2S and CO2 service
- PH (2, 10)
- Salinity 300,000 ppm
- Transfer Method - Mercury Equilibrium
- Clocks Programmable For 1, 2,2.5,3,3.5 - and 6 hours
- Supply of #10 kit recommended two years spare part for flow through sampler.
2- supply of #10 wellhead digital memory pressure gauge with specifications as follows:
Sensor Type Silicon-Sapphire
Pressure Ranges Up to 10,000 PSI
Pressure Accuracy 0.03% (FS)
Pressure Resolution 0.0003%
Pressure Drift <3 PSI / year
Temperature Rating -4°C to 65 °C
Temperature Accuracy 0.5 °C
Temperature Resolution 0.01 °C
Power Source Two single D lithium pack, up to one-year usage
Communications USB, RS232
Data Set time/pressure/temperature
Memory Capacity 1,000,000 data sets
Display Mode liquid crystal
Outside Diameter 4.625" (117.5 mm) (indicator dial)
Overall Length 10" (254 mm)
Service H2S, CO2
Sample Rate 1 second to 18 hours
Connection 1/2" NPT/Autoclave
Suitable carry case
- Supply of #5 kit Recommended spare part for two years.
3- Supply of #10 Digital Hydrometer type SBS with specification as follows:
- Measures specific gravity and temperature
- Specific Gravity testing Range: 0.0 to 2.0
- Indicator: High resolution dot matrix display;
- Measuring time: within 3 Seconds
- Power Supply: (2) AAA batteries – approx. 90 hours battery life
- Accuracy: +/- 0.001
- Suction nozzle: 12"
- Stores 1,100 results internally
- LED display
- Software package for downloading
- Ambiance temperature (-5°C to70 °C)
- H2S and CO2 service
- Suitable carry case
4- Supply of #10 digital thermometer with specifications as follows:
- Rang (-5°C to 100°C)
- H2S and CO2 service
- LED display
- Accuracy: +/- 0.001
- Suitable carry case
5- Supply of #3 laboratory Table Top oil test centrifuge
Bright LCD display
- Capacity 5 × 2.5-5ml
-Top speed 10000 rpm, Minimum speed 500 rpm -
-Short acceleration and deceleration
-Low temperature increase during run
-Easy handling, big buttons
-Short- and continuous run, 99-minute timer
-Two acceleration and deceleration curves
- Motorized lid lock
- Power supply 220-240V, 50/60 Hz
- Noise Level at Maximum Speed <60dB
-Supply of #100 Suitable glass centrifuge tube
6- supply of #5 complete gas sampling system with fluid sentinel with specification as follows:
- Skid mounted portable type
- Working pressure 2000 psi
- H2S and CO2 service.
- Ambient temperature (-5°C to 70°C)
6.1 supply of #20 gas sample cylinder with specifications as follows:
- 1000 CC volume
- Standard with 5 Year No Leak Warranty
- Burst Disc Holder and 2,000-PSI Pressure Gauges
- Seamless 316 Stainless Steel Construction H2S and CO2 service
-Suitable carry case
6.2 supply of #10 capillary tube connection (5 m) compatible with gas sample
System and compatible with 1/2" NPT/autoclave
6.3 supply of #5 kit recommended spare part for two years
|
Related Prooducts: Laboratory, Testing Equipment
Aggregates, Rocks Testing
Cement Testing
Concrete Testing
Drying and Weighing
General
Glassware
Material Testing
Metal Testing
Oil Testing
Soil Testing
Water Analysis
Related Tenders:
Aggregates, Rocks Testing
Cement Testing
General
Glassware
Material Testing
Oil Testing
Soil Testing
Water Analysis
|
|
|
|
