Complete Centrifugal Pump, Motor & Base Plate
Reference: BID8265 6/18/2009, Location: Middle East
Category: Pumps: Centrifugal
Ref. No.: 3607/2009
Bid Bond: 1% From the total value of tender price
Fee: ID 100000
Issue Date: 18/06/2009
Bid Closing Date: 13/07/2009 till 12:00 noon
Company: Midland Refineries Company.
Scope of Work:
Supply of # 2 complete centrifugal pump, motor & base plate:
Pump shall be manufactured according due to API 610 and pump shall be furnished with john crane mechanical seal or Eagle Burgmaun.
Coupling TSK metastream with non-spark guard and spacer.
Hayward Taylor Pump (or equivalent)
Pump size & type: 1.1/2 x 3 x 10l
Serial no.: U50A76 / 00
Service: Hydrocarbon
Capacity: 90 g.p.m.
Head: 391.5 ft.
Suction flange: 3".
Discharge flange: 1 1/2".
Pump stage: two.
Hydraulic test casing assembly 1000 psig.
Pumping temp: 40 - 50 c.
Specific gravity @ p.t: 0.583.
Vapor pressure @ p.t: 13.25 psig.
Discharge pressure: 70----80 psig.
Suction pressure: 30---40 psig.
Differential pressure.: 40 psig.
Bearing type: radial ball, thrust ball, lube oil.
Total sulfur: 400-500 p.p.m
Motor driver:
Speed: 2930 rpm.
EEXD II CT4 ip55, class: F
Volts \ phase \ cycle: 380\3\50
Pump should be manufactured by one of the following manufacturers union, Goulds, KSB, weir, Cerpelli, Ruhr pumpen and Sulzer other manufacturer not accepted.
Pump and electric motor manufacturer should be from U.S.A west Europe or Japan.
|
