Supply of Semi - Automatic Cleveland Flash
Reference: 3557/2011 6/9/2011, Location: Middle East
Category: Laboratory, Testing Equipment
Scope of Work
# 2 Semi - automatic Cleveland flash and fire point tester (ASTM - D 92, IP 36.)electric heating, electronically controlled, supply voltage 220/240V - 50 HZ, range of temperature 400C°, control regulation probe PT 100 under glass, total power 1000 W
Spare parts:
- Cleveland oil cup, brass , with handle, quantity = 4
- Regulation probe for temperature control, quantity = 2
- Flash point standards oils( Cleveland COC ) According to ASTM (D-92) as follow
n- tetradecane 99 + purity 1 liter
n- hexadecane 99 + purity 1 liter
# 2 Update manual kinematic viscosity bath. According to ( ASTM -D445, I P71.)
- Accommodates up to eight standard viscometer tubes.
- Electronic temperature controller with digit readout and setting range 10 to 125 c to the nearest 0.1 c'.
- Low water cut - off device
- Cooling coil for operation around or below ambient temperature.
- Equipped with internal light.
Accessories
- Twice Required Silicon oil
- 8 steel Tube holders( routine) for each apparatus
- Viscosity standard conforming to ASTM standards (S-3, S-6, S-20, S-60, S-200, S-600, S-2000) according to ASTM D-445
- Viscometers tubes(routine)size(100,150,200,300,350,400,450,500)
Note:- two tubes for each size.
Origin:- USA, Europe, or Japan
|
