Spares for Hydrogen & Moisture Analyzer
Reference: 20/2011 7/1/2011, Location: Middle East
Category: Flowmeters
Scope of Work
Spare parts for hydrogen and moisture analyzer.
# 4 Xmtc thermal conductivity transmitter
Measuring cell package (d): explosion proof enclosure, sealed reference (2 port), feb coated aluminum cell, atex eexd iic t6 or t5
Output signal: 4-20
Operating temperature: 65 deg c.
Wetted materials: 316 stainless steel.
# 5 Flow meter
Range: (2 to 20 scfh)
Max pressure: 200 psi, 1379 kpa
Max temperature: 250 deg f, 121 deg c
# 5 Flow meter
Range :(0.2 to 2 scfh)
Max pressure: 200 psi, 1379 kpa
Max temperature: 250 deg f, 121 deg c
# 4 compact regulator.
Max inlet: 210 bar
Control range: 0-1 bar
# 2 Zero calibration gas cylinder (100% ch4) size: 30 cu.ft.
# 2 Span calibration cylinders (100% h2)
Size: 30 cu.ft.
# 4 H2&CH4 cylinders regulators and gauges
# 5 Flow meter
Range: (2 to 12 scfh)
Max pressure: 4000 psi , 2758 kpa
Max temperature: 250 deg f, 121 deg C
# 8 Microprocessor based moisture imageseries probe with thin film aluminum oxide moisture sensor with data sheet calibration
# 1 Moisture image series 1 analyser.
Package: panel mount configuration.
Power: 110 vac operating voltage, 50 Hz.
Program: standard instrument software.
Channel card: for moisture only.
Classification: atex ii (1) g (EEx ia ) IIC (Temp=-20 to 50 Deg C) Certified For Intrinsically Safe Installation of Sensor(s) and Sensor Cable(s).
# 1 Misi channel pcb moisture only
# 1 Mis controller pcb
# 5 7micron sintered filter
Maker: Ge Panametrics Limited (Ireland)
Origin: West Europe, USA.
|
