|
|
|
Centrifugal Pump with Motor & Base Plate
Reference: 3629/2011 7/24/2011, Location: Middle East
Category: Pumps: Centrifugal
Scope of Work
ITEM- 1 -
Complete horizontal centrifugal pump with motor and base plate according to API 610 last addition.
QTY: - 4 NOS
Operation condition of pump
Liquid Gasoline
Flow 25 m3/hr
Pumping temperature 60 co
Sp.Gr @ p. T 0.7
Disch. Press 4 kg / cm2
Suct. Press Atmosphere
NPSH available 2 m
VAP Press 0.8
Nozzle: Suction / Size: 3 " / Postion: End
Nozzle: Discharge / Size: 1.1/2 " / Postion: Top
Material Cod
Material of pump shall be manufactured according to API 610 table H1
Material class C6.
Motor Driver
R.P.M: 2950
Volt / Phase / cycles: 380 / 3 / 50
Explosion proof: EEXD 11 CT4
IP: 55
Motor manufacturer: should be from one of the following:-
(Siemens, Schorch, ABB, Brook) and from origin (West European – USA)
Scope of Supply for Each Unit
1. Pump shall be manufactured according (API610).
2. Bearing should be antifriction ball bearing ring lubricated type.
3. Flange pump drains.
4. Flexible metastream coupling dynamically balanced between pump and motor.
5. Non-sparking coupling guard.
6. Single mechanical seal according to (API 682).
7. Mechanical seal manufacturer: John crane or Eagle Burgmann.
8. Fabricated steel base plate.
9. Centerline case-mounting.
10. Standard documentation including operation and maintenance manuals in English.
11. The pump manufacturer should be from one of the following:- (Union, Goulds, KSB, RUHR Pumpen, Sulzer, Flowsserve and Weir).
12. Pump manufacturer should be (USA, West European)
ITEM- 2-
Complete horizontal centrifugal pump with motor and base plate according to API 610 last addition.
QTY: - 4 NOS
Operation condition of pump
Liquid Kerosen
Flow 25 m3/hr
Pumping temperature 60 co
Sp.Gr @ p. T 0.75
Disch. Press 4 kg / cm2
Suct. Press Atmosphere
NPSH available 2 m
Nozzle: suction / Size: 3 " / Postion: end
Nozzle: Discharge / Size: 1.1/2 " / Postion: Top
Material cod
Material of pump shall be manufactured according to API 610 table H1 material class C6.
Motor Driver
R.P.M: 2950
Volt / Phase / cycles: 380 / 3 / 50
Explosion proof: EEXD 11 CT4
IP: 55
Motor manufacturer: should be from one of the following:- (Siemens, Schorch, ABB, Brook) and from origin (West European – USA)
Scope of Supply for Each Unit
1. Pump shall be manufactured according (API610) .
2. Bearing should be antifriction ball bearing ring lubricated type.
3. Flange pump drains.
4. Flexible metastream coupling dynamically balanced between pump and motor.
5. Non-sparking coupling guard.
6. Single mechanical seal according to (API 682).
7. Mechanical seal manufacturer: John crane or Eagle Burgmann.
8. Fabricated steel base plate.
9. Centerline case-mounting.
10. Standard documentation including operation and maintenance manuals in English.
11. The pump manufacturer should be from one of the
Following :- (union, Goulds, KSB, RUHR Pumpen, Sulzer, Flowsserve and Weir).
12. Pump manufacturer should be (USA, West European)
ITEM- 3-
Complete horizontal centrifugal pump with motor and base plate according to API 610 last addition.
QTY: - 2 NOS
Operation condition of pump
Liquid Diesel oil
Flow 25 m3/hr
Pumping temperature 60 co
Sp.Gr @ p. T 0.81
Disch. Press 4 kg / cm2
Suct. Press Atmosphere
NPSH available 2 m
Nozzle: Suction / Size: 3 " / Postion: End
Nozzle: Discharge / Size: 1.1/2 " / Postion: Top
Material Cod
Material of pump shall be manufactured according to API 610 table H1 material class C6.
Motor Driver
R.P.M: 2950
Volt / Phase / cycles: 380 / 3 / 50
Explosion proof: EEXD 11 CT4
IP: 55
Motor manufacturer: should be from one of the
Following :- (Siemens, Schorch, ABB, Brook) and from origin (West European – USA)
Scope of Supply for Each Unit
1. Pump shall be manufactured according (API610).
2. Bearing should be antifriction ball bearing ring lubricated type.
3. Flange pump drains.
4. Flexible metastream coupling dynamically balanced between pump and motor.
5. Non-sparking coupling guard.
6. Single mechanical seal according to (API 682).
7. Mechanical seal manufacturer: John crane or Eagle Burgmann.
8. Fabricated steel base plate.
9. Centerline case-mounting.
10. Standard documentation including operation and maintenance manuals in English.
11. The pump manufacturer should be from one of the following: - (union, Goulds, KSB, RUHR Pumpen, Sulzer, Flowsserve and Weir).
12. Pump manufacturer should be (USA, West European)
|
Related Prooducts: Pumps: Centrifugal
Axial Flow Pump
Deep Well Pumps
Fire Certified Pump, Portable & Wheeled
Fire Certified Pump, Skid mounted
General
High Pressure Pumps
Horizontal Centrifugal End Suction Pumps
Horizontal Split Case Pumps
Hydraulic Pumps
In-Line Pumps
Magnetic Coupled
Mixed Flow Pump
Mud Pumps
Multistage Horizontal Centrifugal
Plastic Pumps
Self Priming Pumps
Slurry Pumps
Submersible Pumps
Vacuum Pumps
Vertical Centrifugal Pump
Vertical Pumps w/ Cardan Shaft
Vertical Split Case Pumps
Vertical Submerged Pumps
Related Tenders:
Fire Certified Pump, Portable & Wheeled
Fire Certified Pump, Skid mounted
General
High Pressure Pumps
Horizontal Centrifugal End Suction Pumps
Horizontal Split Case Pumps
Hydraulic Pumps
Mud Pumps
Self Priming Pumps
Submersible Pumps
Vacuum Pumps
Vertical Centrifugal Pump
Vertical Submerged Pumps
|
|
|
|
