Supply of Vapour Pressure Tester
Reference: SDG0386P16/07 3/7/2016, Location: Asia
Category: Instruments
Scope of Work
The company bids for the supply of Qty: 01 No, vapour pressure tester.
The Technical Specifications are as follows:-
Vapour Pressure Tester:
- The instrument should be capable of measurement of vapour pressure of crude oil and other petroleum products automatically.
- The testing methodology should comply with ASTM D 5191, D6377, D6378, IP 394, 409, 481 and correlate with ASTM D 323, D4953, D5188, D5190, D5482 etc
Technical Detail s / specifications:
Available test methods Programmable method of ASTM D5188, D5191, D6377, D6378, D6897, IP394, IP409, IP481)
- Temperature range 0 to 120°C (32 to 248°F) with Peltier technology - No external cooling is required. Temperature stability 0.01°C (0.02°F)
Pressure range
0 to 1000 kPa (0 to 145 psi) and for LPG testing : 0 to 2000 kPa (0 to 290 psi)
Pressure units (selectable)
hPa, kPa, psi, mmHg, Torr, at, atm
Pressure resolution
0.1 kPa (0.014 psi)
Precision
Repeatability: r = 0.3 kPa (0.044 psi),
Reproducibility: R = 0.7 kPa (0.102 psi)
Vapor / Liquid ratio
Variable from 0.02/1 to 100/1
Single-point, multi-point and curve measurements
Sample introduction Automated via built-in piston.
Sample volume 1 ml (2.2 ml per rinsing cycle)
Measurement time 5 minutes for a standard measurement cleaning by next sample or solvent
Display
Industry proven 7" colour touch screen
Interfaces
Built-in PC with Ethernet, USB and RS232 interfaces Direct LIMS connectivity via LAN and output to printer or PC, (Optional) input by external keyboard, mouse and barcode reader
Remote control
Remote service capability via Ethernet interface
Result database
More than or equal to 1000 detailed test reports storable in internal memory
Operators
Operator names storable
Hazy mark
Results can be marked for hazy appearance
Alarm tracking
All messages are stored in the database together with the results
Automated calibration routine
10-point probe offset correction table, Calibration history tracking, substance Calibration, self-diagnostics
Power requirements
230V AC / 50 Hz
Provision for Field application: 12 V/9 A DC (vehicle battery also)
Dimensions
Weight: 8 to 10 kg (approx)
Length: 8 to 10 inch (approx)
Breadth 10 to 15 inch (approx)
Height: 10 to 12 inch (approx)
|
