Supply of Hydraulic Press
Reference: DID0665L16/L5 3/19/2016, Location: Asia
Category: Hydraulic Pumps
Scope of Work
The company bids invites limited tenders for supply the following items:-
* Item 001 Qty=2, Hydraulic Press with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. Capacity: 30 Ton
ii. Stroke: 150mm approx.
iii. Day Light: 150 mm (Min.) approx.
iv. Day Light: 750 mm (Max.) approx.
v. Total Height: 1455 mm approx.
Vi. Hole Pitch: 150mm approx.
vi. Table Width: 600mm approx.
vii. Cylinder type: Spring Return
viii. Power Source: Hand Pump
* Item 002 Qty=1, Pneumatic Impact Wrench Tool with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. Bolt size: M30 approx.
ii. Square Drive: 3/4'' Sq. Drive approx.
iii. Max. Torque fwd Nm: 1300 approx.
iv. Recommended Torque Range: 670-1200 Nm approx.
v. Free Speed r/min: 3800 approx.
vi. Air Consumption: 18 approx.
vii. Rec. Hose Size: 13mm approx.
* Item 003 Qty=1, Battery Operated Impact Wrench with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. Drive: ½"
ii. Clutch Type: Duo pac
iii. Capacity: M20
iv. Max. Torque: 575 NM
v. Torque range: 70-510 Nm
vi. Speed: 1900r/min.
vii. Weight: 2.95 kg.
viii. Vibration level: p.52-54
ix. Sound level p.52-54
x. Voltage: 18Li-lon
xi. Amp hours: 2.4
xii. Length: No
xiii. No. batteries: 2
xiv. Charge time: 1 hour
* Item 004 Qty=2, Heavy Duty Socket Set with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. Socket Size : 22,24,27,30,32,36,38,41,46,50,55,60 mm
ii. Sliding T- Handle: 20 mm x 500 mm approx.
iii. Extension Bar: 20 mm x 200 mm and 20 mm x 400 mm approx.
iv. Reversible Fine tooth dial change ratchet handle: 20 mm x 510 mm approx.
* Item 005 Qty=2, Combination Set with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
- Combination Spanner set made of Vanadium steel 31CrV3 steel Chrome Plated.
- Ring 10 degree offset from shaft, shaft in girder pattern. - Spanners are manufactured according to DIN 3113 from B, ISO3318, ISO7738.
- Size: 6 mm to 32 mm (Set of 26 Pcs)
* Item 006 Qty=1, Hydraulic Nut Splitter with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. For nut size: 7 to 22 mm, M4 to M14, Weight of the Splitter: 0.8 kg approx.
ii. For nut size: 22-36 mm, M14- M24, Weight of the Splitter: 3.4kg approx
|
