Supply of Circlip Plier Set
Reference: DID0663L16/L5 3/19/2016, Location: Asia
Category: Valves
Scope of Work
The company bids invites limited tenders for supply the following items:-
* Item 001 Qty=2, Circlip Plier Set (Set of 8 PCS) Internal and External with the following Specifications:
Make: Gedore or Orione or Atlas Copco or equivalent make.
Circlip Plier Set for automobile use. Particularly suitable for barely accessible place and for external and internal circlip. Suitable size packed in environmentally friendly cardboard box
* Item 002 Qty=1, Hydraulic Puller 3 Leg Type with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
Hydraulic puller set 30 ton capacity with three Leg Jaw.
i. Hydraulic hole Jack: Hydraulic Single acting Spring Return Plain Ram Central Hole Jack.
ii. Three Jaw Puller Attachment: Reach: 370 mm approx., Spread: 610 mm approx.
iii. Hand Pump: Single stage Hand Pump with approx. 2 Litre Oil Tank Capacity with buit in Relief Valve and Lifting Handle Working Pressure: approx. 700kg/cm2
iv. Hose Pipe: Length 2 m
v. Extension Screw: Extension centre screw with threaded saddle and speed nut.
* Item 003 Qty=1, Manual Heavy Duty Puller 3 Arm with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. Max. Clamping width: 64 - 457 mm approx.
ii. Max. Clamping reach: 305 mm approx.
iii. Spindle Dia: 27 mm approx.
* Item 004 Qty=1, Puller Set with 9 Legs (Multi Legged Puller with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. Puller set with 9 legs: 200x150/220/330 mm approx.
ii. Width Across Flat Actuating Hexagon: 22 mm approx.
iii. Spindle Size: G 1/2"x210 mm approx.
iv. Clamping Spread Max. External Pulling: 200 mm approx.
v. Width of hooked Foot: 40 mm approx.
vi. Depth of Hooked Foot: 7 mm approx.
vii. Thickness Hooked Foot at Tip: 5 mm approx.
viii. Loading Max. : 5 Ton approx.
ix. Clamping Reach : 150/200/3000 mm
* Item 005 Qty=1, Ball Bearing Extractor Set with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. 5 Hub with Spindle
ii. 8 Set Leg
iii. 1 Plug In Handle and 4 supporting Ring.
* Item 006 Qty=2, Valve Spring Compressor with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. Valve Spring Compressor used for Overhead Valve Engine with one pair each of Straight and Offset Hook.
ii. Size: 390 mm approx.
iii. Clamping Width: 120-280 mm approx.
* Item 007 Qty=1, Dremometer Torque Wrench with the following Specifications:
Make: Gedore or Orione or Power Team or equivalent make.
i. Square Drive 3/4" approx.
ii. Size: 110-550 Nm Approx.
iii. Scale Division : 10 Nm / 10 lbf.ft
|
