Supply of Ball and Roller Bearings
Reference: DFS1054L17/02 5/10/2016, Location: Asia
Category: Fittings
Scope of Work
The company invites tenders for the supply of the following items:-
* Item 001 Qty=4, Ball and Roller Bearings:
Bearing, Ball, Journal, Single Row, '00' FIT Medium Series, Inch Sizes, to B.S. 292-1958 Table 23, BRM Series.
- Ball bearing:
RMS 27 make SKF;
MS 19.3/4 make FAG or equivalent bearing;
MJ 3.3/8 make RHP; or
RMS 27 make AEC; or
RMS 27 make BSC:
- Dimensions:-
I/Dia - 3.3/8".
O/Dia - 7.1/2",
Width = 1.9/16"
Note: Any bidder other than OEM offering RHP, AFC or BSC make bearing need to submit dealership authorization certificate including warranty back up for the bearing along with their offer
* Item 002 Qty=20, Pillow Block, Ball Bearing, Alignable, Fixed type, Open End Unit, RE-Lubricateable, Complete with Bearing, Collar and Seals Heavy Duty Series:
- Maker's Designation:
Link Belt PU339
- Dimensions:
Bearing drawing and Dimensions are as under:-
a) Diameter of the shaft --- 61.91 mm (2.7/16")
b) Centre height (A) ---: 92.07 mm *(3.5/8")
c) Distance between bolt holes (B) --- : 285.75 mm (11.1/4")
d) Overall housing height (L) – : 180.97 mm (7.1/8")
e) Mounting pad length (C) -- : 349.25 mm (13.3/4")
f) Mounting pad width (E) --- : 88.90 mm (3.1/2")
g) Length through bore (D) --: 84.13 mm (3.5/16")
h) Mounting bolt size (F) - : 19.05 mm (3/4")
i) Mounting pad height (H)---- :41.27 mm (1.5/8")
j) Locking collar outside dia (M)--- : 106.36 mm (4.3/16")
k) Mounting bolt hile a lot length (S)--- : 34.92 mm (1.3/8")
l) Distance from housing centerline to inner ring long hub face (U)---- : 49.21 mm (1.15/16") m) Distance from housing centerline to cap face (W)--61.91 mm (2.7/16")
n) Approx weight --- : 12.45 kgs (27.50 lbs)
* Item 003 Qty=8, Wide Inner Ring Ball Bearing, Alignable Spherical Out Side Diameter, Re-Lubricateable, Complete with Collar, Lock Screw and Two Housing Mounted Seals.
- Link Belt No: U 339D
- Fafnir No: GN207KRRB
- Shaft Dia.: 2.7/16"
- O/Dia.: 130 mm
- Inner Ring Width: 3.5/16"
- Outer Ring Width: 31 mm
Note: Manufacturer's inspection certificate should be forwarded along with the supply.
|
