Gulf Oil and Gas
      Go to 3D Projects Premium Content Zone >>  |  Logon Oil and Gas

Supply of Sulphonated Asphalt
Reference: SSG1718P17/05 7/14/2016, Location: Asia
Category: Corrosion Products/Services

Scope of Work
The company invites bids for the supply of Qty= 4000 BAG, Sulphonated Ashphalt:

- Description of the product and use:
A partially water soluble sodium salt of sulphonated ashphalt used for shale / clay inhibition and to prevent sloughing of problematic splinttery shales.

- Specifications are as follows:
1. Physical properties: The material, as received, should be a free flowing brown to black coloured powder, free from lump and other foreign matter.
2. Moisture content, measured by drying: 10.00 at 105 +/- 2 degC, % by mass, maximum.
3. Soluble matter content, % by mass
(i) In distilled water: 65 - 70
(ii) In dimethyl chloride: 30 - 35
4. PH of 2% (w/v) solution in distilled water a: 8.5 26 +/- 2 degC, minimum
5. Qualitative test for presence of sulphonate group.: Positive
6. Barium chloride test: Mix 1% (w/v) of the sample in distilled water and stir in multimixer for 10 minutes to this add 150 ml distilled water and 0.5 gm barium chloride (LR grade) and again stir for 10 minutes in multi mixer. Pour the content to a beaker and observe after 30 minutes. No formation and setting of black coloured precipitates should take place.
7. Performance Test:
A. Lubricity test : Prepare a 7.5% (w/v) bentonite suspension in distilled water using OIL approved bentonite and stir the suspension for 15 minutes in multimixer so that no lumps are left after the stirring period. Age the suspension for 72 hrs at 90 +/- 2 degC. After the lapse of the aging period, cool the suspension and stir for 15 minutes in multimixer. Adjust apparent viscosity for the suspension to 15 cp by dilution with distilled water, if distilled water, if necessary. Treat the suspension with 2.0% (w/v) sulphonated ashphalt sample and stir for 30 minutes in multimixer for lubricity test. Determine lubricity co-efficient using a standard mud lubricity tester.
Lubricity co-efficient should not be more than 0.30



Related Prooducts: Corrosion Products/Services Camp Building  Cleaning Equipment, Services  Communication  Corrosion Products/Services  Development  Exploration  Food Supplies  General  Labor Services  Land & Leasing  Mine Clearance  Oil & Gas Companies  Production  Service Companies  Skilled Labors  Transportation, 4X4 Trucks  Unskilled Labors  Utility Systems  Waste Disposal  Water Supply Services  Welding Products/Services 

Related Tenders: Camp Building  Cleaning Equipment, Services  Communication  Corrosion Products/Services  Development  Exploration  Food Supplies  General  Labor Services  Mine Clearance  Oil & Gas Companies  Production  Service Companies  Skilled Labors  Transportation, 4X4 Trucks  Unskilled Labors  Utility Systems  Waste Disposal  Water Supply Services  Welding Products/Services 

PGS Starts Faroe-Shetland Basin Rejuvenation
PGS Announces New Share Capital after Conversion of Parts of Convertible Bond
PGS Awarded Extended Long Offset Contract
PGS’ First Simultaneous Node and Streamer Acquisition Contract
Exploration
Development
Oil & Gas Companies

Gulf Oil and Gas E-Marketplace - Premium Content

Copyright © Universal Solutions S.A.E. All rights reserved. Privacy Policy. - Contact Us