Flexible Steel Hose for Bop Control Lines
Reference: SDG7516P18/09 4/2/2018, Location: Asia
Category: Metallic Hoses
Scope of Work
The company announces its need for supply of Flexible steel hose for bop control lines Conforming to API Spec. 16D as per the following minimum specifications:
a) Working Pressure : 5,000 PSI (351.53 kg / Cm2) Minimum.
b) Test Pressure : 7,500 PSI (527.30 kg / Cm2) Minimum
c) ID : 1/2 inches (12.70 mm) Minimum.
d) OD : 1 inches to 1.1/2 inches (25.40 mm - 38.10 mm).
e) Length : 12 feet. (- 0 / + 1 ft.).
f) Service Temp. Range: - 20 Deg C to 120 Deg. C (Minimum range).
g) Bending Radius : 9.06 inches or lower.
h) End connection : 25.4 mm (1 inch) hammer lug unions (Both male & Female) at each end. Both End connectors should be of built-in integral type.
i) Protection : Full leng.
|
