|
|
|
Supply of Rotary Drilling Hose
Reference: SSG9727P19/04 11/13/2018, Location: Asia
Category: Drilling Instruments
Scope of Work
The company announces its need for supply Rotary Drilling Hose.
Hose, Rotary drilling with working pressure 140.6 Kg/Cm.Sqr. (2000 psi) and 20 test pressure 210.97 Kg/Cm.Sqr. (3000 psi), suitable for handling drilling mud containing different additives of Maximum PH-9 and workover fluid (i.e. crude oil, acid solution, salt solution of maximum salinity 50,000 PPM) having both end pin connection of 50.8 mm (2") API line pipe thread with steel thread protector. The rotary hose should be complete with safety clamps installed on both ends. Two nos. of suitable 50.8 mm (2"), Fig. 602 hammer wing unions t be supplied loosely along with the rotary hose.
- Size :
- Inside diameter : 50.8 mm (2")
- Length : 12.192 mtrs. (40 ft.)
- Operating bending radius : 914.4 mm (3 ft.)
- Grade : `B' as specified in API Spec.7K
|
Related Prooducts: Drilling Instruments
Analyzers, Gas
Calibration Equipment
Calibrators, Electronic, Pneumatic
Concentration
Conductivity Meters
Density
Detector, Gas
Dissolved Oxygen meters
Drilling Instruments
Float Switch
Gas meters
General
Indicators and Recorders
Leak Locators
Level meters
Liquid Measurement
Load cells
Monitoring & Control
Mud Control
Mud Logging
pH and REDOX
Pressure gauges/ Transmitters
Radiation Detection
SCADA Systems
Temperature gauges/ Transmitters
Thermocouples
Thermowells
Transducers
Transmitters
Transmitters, Pressure
Turbidity Meters
Viscosity
Weather Station
Weighing Equipment
Related Tenders:
Analyzers, Gas
Calibration Equipment
Calibrators, Electronic, Pneumatic
Conductivity Meters
Density
Detector, Gas
Dissolved Oxygen meters
Drilling Instruments
Gas meters
General
Indicators and Recorders
Leak Locators
Level meters
Liquid Measurement
Monitoring & Control
Mud Logging
Pressure gauges/ Transmitters
SCADA Systems
Temperature gauges/ Transmitters
Thermocouples
Thermowells
Transmitters
Transmitters, Pressure
Viscosity
Weather Station
|
|
|
|
