Fire & Safety Equipment
Reference: 1221/2019 5/28/2019, Location: Middle East
Category: Fire Protection & Suppressing Equipment
Scope of Work
The company announces its need for supply of fire & safety equipment.
The equipment to be supplied are as follows: -
- Item 001 Qty=5,000, of Clear (white) safety goggle
-wide vision safety glass & integral side shield for increased protection.
-moulded nose piece for comfort.
-adjustable length ratcheting side arms ensure optimum fit.
-optical class 1 anti scratch & anti fog polycarbonate lens.
-field of view over 1800 (panoramic).
-high visibility lens enable the user to be seen in the dark & work in complete safety.
- light weight.
- glass colour :- white.
-conforms to EN 166.1.f.
-the goggles must be anti broken packing & canning in anti broken boxes for good long time store.
- Each proposal should attach with sample for testing, otherwise refused.
- Origin :- general.
- Item 002 Qty=2,000 of Blue Safety helmet.
1-The shell made of high density polyethylene (HDPE), provides superior impact protection.
2- Light weight.
3- High dielectric strength (440 v a. c.).
4 - Suspension system include front head band, with cushion air sweatband, ratchet suspension, six -point suspension.
S-Self- adjusting crown straps ensure a comfortable fit.
6-certified according: ANSI I ISEA Z 89.-2009 (class C, type I ) or. Europe °certified according to EN 397 , with the following optional requirements:
-lateral deformation (LD )
-electrical insulation -440 V AC,
-molten metal splash (MM) °approved to the following standards: ,
-EN 50365 - Electrically insulating helmets for
low voltage installations " ,
-EN134463-1 Use in potentially explosive Atmosphere (ATEX).
7-each proposal should attach with sample for testing, otherwise refused.
8-origin: USA, Canada European countries, Australia, south Korea, India.
- Item 003 Qty=100 of Green safety helmet:
I-the shell made of high density polyethylene (HDPE), provides superior impact protection.
2-light weight.
3-high dielectric strength ( 440 V a. c ).
4-suspension system include front head band, with Cashion air sweatband, ratchet suspension, six - point
Suspension.
5-self - adjusting crown straps ensure a comfortable fit
6-certified according: . ANSI 1ISEA Z 89.1-2009 ( class C type I )or. . Europe o certified according to EN 397 , with the following optional requirements:
- lateral deformation (LD).
-electrical insulation - 440 V AC.
-molten metal splash (MM).
7-approved to the following standards:
-EN 50365 - electrically insulating helmets for low voltage installations.
-EN 13463 -1- Use in potentially explosive atmosphere (ATEX).
8-each proposal should attach with sample for testing, otherwise refused.
9- origin: USA, Canada, European countries, Australia, South Korea, India.
- Item 004 Qty=500 of Red safety helmet:
1- the shell made of high density polyethylene ( HDPE ) , provides superIor impact protection.
2-light weight.
3-high dielectric strength ( 440 V A. C ).
4- suspension system include front head band, with Cashion air sweatband, ratchet suspension, six - point suspension.
5-self - adjusting crown straps ensure a comfortable fit.
6-certified according:
ANSI IISEA Z 89.1-2009( class C, type I) or . Europe
Certified according to EN 397, with the following optional requirements:
-lateral deformation (LD).
-electrical insulation - 440 V AC.
-molten metal splash (MM).
7-approved to the following standards: -EN 50365 - electrically insulating helmets, for low voltage installations.
-EN 13463 - 1.~ Use in potentially explosive atmosphere (ATEX).
8-Each proposal should attach with sample, for testing, otherwise refused.
9-origin: USA, Canada, European countries, Australia, south Korea, India.
- Item 005 Qty=1,000 of White safety helmet:
1-the shell made of high density polyethylene (HDPE), provides superior impact protection.
2-light weight.
3-high dielectric strength (440 V a. c).
4-suspension system include front head band, with Cashion air sweatband, ratchet suspension, six
point suspension.
5-self- adjusting crown straps ensure a comfortable fit
6-certified according: .ANSI/ISEA Z 89 .1-2009
(class C, type I) or .Europe I, o certified according to EN 397 , with the following Optional requirements:
- lateral deformation ( LD ).
-Electrical insulation - 440 V AC.
-molten metal splash (MM).
7-approved to the following standards:
-EN 50365 - electrically insulating helmets for low voltage installations
-EN 13463 -1 -Use in potentially explosive atmosphere (ATEX).
8-each propos~l should attach with sample for testing, otherwise refused.
9- origin: USA, Canada, European countries, Australia, south Korea, India.
|
