Crank Pulley 12G1A
Reference: 50/2019/D 5/11/2020, Location: Middle East
Category: Vehicle Parts
Scope of Work
The company announces its need for supply of Crank Pulley 12G1A.
1- Cold welding. Place the fixed number of beds, and turn it up to a diameter of 250mm.
2- Cold welding. Place the four movable beds and turn it up to the diameter of 220mm.
3- Pour fixed bedding with antimony and turn it into a diameter of 250.2mm, number five only.
4- Pour the movable beds with antimony material and turn it until the diameter of 220.2mm is only four.
5- The length of the crank is 370 cm
6- The bidder should visit the site and check the cranks and beds, before submitting the offer.
7- The implementation period should not exceed 45 days.
8- The bidder should submit a one-month warranty from the date of operation of the compressor.
|
