Coil for the Manufacture of (200) Liter (Drum Body / Ends) Reference: 1616/2020 6/23/2020, Location: Middle East Category: Contracting Services
Scope of Work
The company announces its need for Cold Rolled Carbon Steel Coil Commercial Quantity Skin – Rolled Finish and oiled per mills standards according to B.S. 1449-PART-1-1972 CR4 or JIS G 3141 SPCC – SD or ASTM A 366-72.
Dimension of Coil ? Width = 1220 MM-0/+ 3 MM Thickness = 1.00 MM Weight if Coil = 8 TON / ± 1 TON Inside Diameter of Coil = 610 MM
Packing of Coil ? 1- Edges of coill should be sprayed or brushed heavily with oil. 2- Coil should be wrapped by a waterproof paper then it should be completely wrapped with two layers of metallic sheets. 3- Coil should be atrapped by (6) steel bands through coil bore and (3) Bands around circumference. 4- Coil should be Horizontal while shipping. 5- Coil should be not brone any welding joint along the whole length of coil.
ORIGIN : ALL ORIGIN. DELIVERY TIME: 180 DAYS. Theoretical examination must be submitted which is including the following requirements:- 1 – Material safety from damage 2 – Packaging 3 – Conformity of quantities Mill certificate Dimensions check THIRD PARTY INSPECTION: -Lioyeds Register -Bureau Veritas -Intertek Global - Tuv Rheinland -ATG -SGS -RINA -AL rookl
