Supply New Heavy Duty Centrifugal Pumps With Spare Parts Item (603)
Reference: 597/2020/E 10/27/2020, Location: Middle East
Category: Pumps: Centrifugal
Scope of Work
The company announces its need for Supply New Heavy Duty Centrifugal Pump type (OH2) driven by electrical motor and flexible coupling. Mounting on common base blate. Material and design. According to API 610 Standard for pump and IEC for motor.
Operations Condition for pump (603)
Capacity at inlet temperature Normal : 85 m³/hr
Capacity at inlet temperature Design : 102 m³/hr
Design Head : 145 m
Discharge pressure : 12.6 ATA
Suction pressure : 2.9 ATA
Liquid handled : BENZINE
Liquid Inlet temperature : 43 ºc
Specific gravity at inlet temperature : 0.667
Viscosity at inlet temperature: 0.376 cst
Vapor prussur: 2.6 ATA
NPSH a : 4.5 m
General Specifications for all Pumps:
1- Cooling water inlet pressure: 3.5 KG/CM²
2- Cooling water inlet temp: 32 – 42 °C
3- Cooling water- outlet pressure: 2 KG/CM
4- Site condition:
- Ambient temp: MIN/MAX : 55 °C
- Relative humidity max: 90%
- Location : Outdoor
- Area classification : Hazardous are
5 - Coupling type : TSCS Metastream.
6 - Mechanical seal ( )
7 - Power available : 380 V, 3PH ,50Hz .
8 - Motor : 3PH , Cupper winding and cast iron body ,ExdIIBT4 , Squirrel Cage Induction motor, IP55, Insulation class F, Temperature rise B , Continuous Operation (S1), mouting B3 , Cooling method : IC411
Origin : (West Europe – USA – JAPAN)
9 - Guarantee for pump & Motor.
10 - Operation & Maintenance manual and CD provide with pump (three copes).
11 – The pump with motor should be new bran.
12 - All tests and origin certificates should be provide with pump.
13 - 4RT Sensor for bearings of pump & Motor.
14- Fat must be W.T by SRC
|
